Points for camber plates?

Questions, comments, and discussions concerning COMSCC rules.

Moderator: blindsidefive0

Post Reply
TXBDan
Rookie Racer
Rookie Racer
Posts: 88
Joined: Wed Apr 29, 2015 8:47 pm
Location: Wakefield, MA

Points for camber plates?

Post by TXBDan » Mon Feb 15, 2016 3:26 pm

Hi all,

I'm adding camber plates to my E36 for next year. The plates use a spherical bearing and of course allow for camber/castor adjustment. Am i correct in thinking this is a two point modification?

1 - Non-factory Trim suspension bushings or spherical bearings, except rubber or poly
1 - Non-factory Trim/modified suspension components which enable eligntment settings beyond factory trim capability

Assuming that's correct, I guess i'm free to go nuts with spherical/adjustable bits, like lower control arms, RTABs, etc, without further penalty, eh?

Thanks,
Dan
Dan Durusky
Cayman S

dtlemoine
Speed Racer
Speed Racer
Posts: 361
Joined: Mon Oct 26, 2009 7:01 pm

Re: Points for camber plates?

Post by dtlemoine » Mon Feb 15, 2016 3:51 pm

Just 1 point - the stock hats are already spherical!
Dave

E36 328is | SD #14

TXBDan
Rookie Racer
Rookie Racer
Posts: 88
Joined: Wed Apr 29, 2015 8:47 pm
Location: Wakefield, MA

Re: Points for camber plates?

Post by TXBDan » Mon Feb 15, 2016 3:56 pm

Ah, nice. Thanks.

Hrmmm... 82.1 points. Not exactly where i wanted to be. :)
Dan Durusky
Cayman S

dtlemoine
Speed Racer
Speed Racer
Posts: 361
Joined: Mon Oct 26, 2009 7:01 pm

Re: Points for camber plates?

Post by dtlemoine » Mon Feb 15, 2016 3:58 pm

Hah! What weight are you planning to run, and what's your current tire selection? Any motor mods? Suspension?
Dave

E36 328is | SD #14

TXBDan
Rookie Racer
Rookie Racer
Posts: 88
Joined: Wed Apr 29, 2015 8:47 pm
Location: Wakefield, MA

Re: Points for camber plates?

Post by TXBDan » Mon Feb 15, 2016 6:25 pm

Weight is a good question. I really need to find out what my car weighs so i can play with the numbers. It has deleted sunroof, A/C, back seats, and has race seats, but also has a roll bar.

Tires are NT01s, suspension is TCK DAs, sway bars. Motor is mostly stock, but has M50 manifold and CAI.

The smartest points build is probably bone stock with the stickiest tires and lightest weight. But where's the fun in that?!
Dan Durusky
Cayman S

6PAK72
Speed Racer
Speed Racer
Posts: 764
Joined: Sat Nov 29, 2008 11:30 am
Location: Wilton NH

Re: Points for camber plates?

Post by 6PAK72 » Sun Feb 21, 2016 9:12 am

TXBDan wrote:The smartest points build is probably bone stock with the stickiest tires and lightest weight. But where's the fun in that?!
++
Jeff Baker
Wilton, NH
#42 95 Miata
72 TR6
79 TR7 V6 in shed

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests